Explosion - proof ultrasonic flowmeter meter KLD-3000FB
The fixed split explosion -proof ultrasonic flowmeter, the host uses isolation -proof explosion -proof, is used in flammable and explosive occasions, is safe and reliable, and the sensor is installed on a pipeline that needs to be measured. Measurement, mostly used in ultrasonic flow flowmeters in bad occasions such as sewage, coal washing water, and sewage under the oil field well.
Key Word:
Explosion-proof ultrasonic flowmeter meter KLD-3000FB
Product Details
Size: 300*300*150mm
The fixed split explosion -proof ultrasonic flowmeter, the host uses isolation -proof explosion -proof, is used in flammable and explosive occasions, is safe and reliable, and the sensor is installed on a pipeline that needs to be measured. Measurement, mostly used in ultrasonic flow flowmeters in bad occasions such as sewage, coal washing water, and sewage under the oil field well.
Product Features
• With self -diagnostic function, it is prompted whether the current working status is normal.
• Support various languages such as Chinese, Britain, and Italian, which is suitable for the needs of different users.
• Select different types of sensors, which are suitable for measurement of different caliber pipeline flow, and can reach the maximum DN6000mm.
• Use dual -balanced signal differential launch and receive circuit to effectively resist the sources of laugher of the frequency converter, television tower, high -voltage line.
• It can be transmitted through the RS485 bus, and the transmission distance can reach more than kilometers. It is very convenient to use the MODBUS protocol networking network, which can meet the various requirements of different users.
• Add a pair of PT100 temperature sensors to measure heating (cold) pipelines for returning water temperature, and perform real -time monitoring of the heat (cold) amount, which can realize the measurement function of the heat (cold) amount.
Product Technologies
Transmitters | Explosion-proof rating | ExdlIBT6 | ||
Explosion-proof type | Factory flameproof and intrinsically safe type | |||
Measurement accuracy | ±1% | |||
Measuring range | 0~±10m/S | |||
Data logging | Automatic memory of positive/negative/net accumulation of the previous 512 days, 128 months, and the previous 10 days; Automatically remember the first 30 times of power off time and flow rate, and can realize automatic or manual replenishment of flow | |||
Data interface | Isolated RS485 mid-line interface, the flow meter can be upgraded through the PC computer, and supports protocols such as modbus | |||
Screen display | 2x10 Chinese backlit text or 2x 10 character liquid display, supporting Chinese, English and Italian | |||
Flow direction | Positive and reverse bidirectional metering, and measurement of positive, negative, and net cumulative flow/heat | |||
Power supply mode | AC85-264V或DC9-24V | |||
Signal output | 1 4-20mA current output | |||
1 OCT pulse output (programmable pulse width between 6~1000ms, default 200ms) | ||||
1 relay output | ||||
Signal input | Three 3-4mA analog inputs, accuracy 20.0%, can collect temperature, pressure, liquid level and other signals | |||
2-way three-wire PT100 platinum resistor for heat measurement | ||||
Sensor | Type of sensing required | Clamp-on type | Plug-in | Pipe segment |
Nominal diameter | DN15~6000mm | DN15-2000mm | DN15~1000mm | |
Suitable for pipes | Carbon steel, stainless steel, cast iron, copper, PVC, pot, FRP and other uniform and dense pipes, allowed to be lined | |||
Straight pipe section | The sensor installation point is best satisfied: 10D upstream, 5D downstream, 30D from the pump outlet (D is the pipe diameter) | |||
Measuring medium | Water, seawater, sewage, alcohol, various oils and other single, uniform and stable liquids that can conduct ultrasonic waves | |||
Pressure rating | Standard, 1.6MPa | |||
Sensor temperature | Standard probe: -30~180°C High temperature probe: -40~280°C | |||
Fittings | Couage, steel strip, ultrasonic cable 5mx2 |
Product Model
Shell material
Alumor
ABS flame retardant material
Sensor type
Standard outer clamping (DN15 ~ 6000mm)
High-temperature outer clamping (DN15 ~ 6000mm)
Insert type (standard, extension, parallel)
Pipe segmentation (DN15 ~ 1000mm)
Sensor temperature
Room temperature (standard)
high temperature
Power supply
AC85~264V
DC9~24V
Solar power supply
Pressure Level
1.6MPa
Long communication line
Special-wave special cable 5 meters*2
Optional function
No (standard)
GPRS Far Pass function (2G)
GPRS Far -pass function (4G full Netcom)
NB-LOT far-pass function
Inquiry
Note: Please leave your email and our professionals will contact you as soon as possible!
Related Products