Standard insertion sensor KLD-C1

During the installation, the special opening tool is used to open two installation holes on the surface of the pipeline to install. It can achieve non -stop water installation. The sensor and the measured medium are directly contacting, and the measurement is stable and reliable.
• Open hole size: 19mm
• Material: The base is carbon steel; the ball valve, the locking nut is 304 stainless steel;
• The use of economic and practical use on large -caliber pipelines also improves the accuracy and reliability of measurement;
• The ultrasonic transmitter of the inserted sensor is directly in contact with the measured liquid, which improves the measurement accuracy and the operating stability of the machine;
• It solves the problems of the long -term use of the foreign central sensor and the drying agent caused by the drying agent and affect the ultrasonic signal cannot be transmitted normally or working properly;
• Solving the problem of using the external clip sensor signal and abnormal measurement due to the severe corrosion of the pipeline or corrosion; and it can be installed on the pipelines that cannot be welded or cannot transmit ultrasonic signals such as cement pipes and glass fiber reinforcement;
The parallel insertion sensor is unlimited to the original of the dry wall. It can measure the water flow with more water quality (such as gravel, groundwater, muddy, etc.) suitable for various occasions with insufficient installation space.
• Standard insertion rod stainless steel ball valve is 160mm long.