Parallel plug -in sensor KLD-C3

Type: parallel insert sensor Measurement range: parallel insertion rod 170mm use range diameter DN32-DN150/parallel insertion rod 240mm use range diameter DN200 or more Temperature range: -30 ℃ ~ 160 ℃ Method: V method Installation requirements: No need to disconnect and break, no pressure loss, can be opened with pressure

Category:

Insert Ultrasonic Sensor

Key Word:

KLD-C3

Tel:

19526537191 (Manager Ni)

15542657470 (Manager Su)

Inquiry

Product Details

During the installation, the special opening tool is used to open two installation holes on the surface of the pipeline to install. It can achieve non -stop water installation. The sensor and the measured medium are directly contacting, and the measurement is stable and reliable.
• Open hole size: 19mm
• Material: The base is carbon steel; the ball valve, the locking nut is 304 stainless steel;
• The use of economic and practical use on large -caliber pipelines also improves the accuracy and reliability of measurement;
• The ultrasonic transmission crystal of the inserted sensor is directly exposed to the measured liquid, which improves the measurement accuracy and the operating stability of the machine;
• Solving the problem of drying agent due to the long -term use of the outer clip -type sensor, which affects the problem of the ultrasonic signal that cannot be transmitted normally or working properly;
• When the external wall of the pipeline is severely scaled or corrosive, the external clip sensor signal is weak and the measurement is abnormal, and it can be installed on the pipelines that cannot be welded or cannot transmit ultrasonic signals such as cement pipes and glass fiber reinforced advances;
Parallel insertion sensors are unlimited for wall thickness, and can measure water with poor water quality (such as gravel, groundwater, weeds, etc.) are suitable for occasions with insufficient installation space.

Inquiry

Note: Please leave your email and our professionals will contact you as soon as possible!